SELF TEST FUNCTION
When reverse gear is selected, the sys-
tem will test the rear sensors
automatically.
If all sensors are working correctly, the
unit will beep once.
If a damaged or defective sensor is
detected the unit will beep three times.
Other sensors will continue to function
normally.
LEARNING FUNCTION
To set the unit.
Turn ignition ON, shift
the gear from N to R and back for 10
times quickly in 1 second intervals (10
second total), ending with the gear lever
in Reverse.
Leave in R position for 6 seconds to
achieve “LEARNING” function.
To clear the memory.
Turn ignition
ON, shift the gear from N to R and back
12 times quickly in 1 second intervals
(12 second total), ending with the gear
lever in Reverse.
Leave in R position for 8 seconds to
achieve “CLEAR” function.
NOTE:
If you forget or shift incorrectly,
please stay at R position for 2 seconds to
reset and the unit will assume that the
next time will be the first time..
page 3