4
WHAT’S INCLUDED
Use the Provided Reference Numbers When Ordering Products and Parts Above • Toll Free: 888-786-7899
IPA® Part #
Description
Qty.
Unit
A
#9046-INHOSE-AS
12' Input Hose
1
F/H/FH
B
#9046-OUTHOSE-AS
12' Output Hose
1
F/H/FH
C
#PMP00004
25 gpm Pneumatic Pump
1
F/H/FH
D
#7900K-WHLKIT
Rubber Pneumatic Wheel Kit
1
F/H/FH
E
#FIL00010
10-Micron Water-Blocking Filter
2
H/FH
F
#FIL00003
30-Micron Particulate-Blocking Filter for
Diesel and Fuel
2
F/FH
G
#FIL00001A
17-Micron Water-Blocking Filter
1
F/FH
H
#FIL00002A
178-Micron Wire Mesh Filter w/ Housing
1
H/FH
I
#FIL00002
381-Micron Wire Mesh Filter w/ Housing
1
F/FH
J
#FIL00005
Filter Wrench
1
F/H/FH
K
#9046-BRWAND-AS
5' ¾" Dia. Flex Wand w/ Flow-Through Brush
1
F/FH
L
#9046-OUTPUT2-AS
5' ½" Dia. Flex Wand
1
F/H/FH
M
#9046-OUTPUT-AS
5' ¾" Dia. Flex Wand
1
F/H/FH
N
#9046-INPUT-AS
5' 1" Dia. Rigid Wand
1
F/H/FH
O
#9046-VALVE-AS
Quick-Disconnect Ball Valve
1
F/H/FH
P
#007900K-2BCHAS
Chassis Ground Cable
1
F/H/FH
Q
#9046-90DEG-AS
Quick-Disconnect Right Angle
1
F/H/FH
R
#9046-HSADPTR-AS
Quick-Disconnect Adapter Hose
1
H/FH
S
#9046-3
Drip Pan
1
F/H/FH
A 12' Input
Hose
B 12' Output
Hose
E 10-Micron
Water-Blocking
Filter
J Filter Wrench
G 17-Micron
Water-Blocking
Filter
C 25
gpm
Pneumatic
Pump
D Rubber Pneumatic
Wheel
Kit
(Image is not actual representation of final product. Exact location and style of fittings may vary.)
O Quick-Disconnect
Ball Valve
Q Quick-Disconnect
Right Angle
S Drip
Pan
F 30-Micron
Particulate
Blocking
Filter
K 5',¾" Dia. Flex
Wand with Flow-
Through Brush
L 5',½" Dia.
Flex Wand
M 5',¾" Dia.
Flex Wand
N 5',1" Dia.
Rigid Wand
P Chassis
Ground
Cable
R Quick-Disconnect
Adapter
Hose
H 178-Micron Wire
Mesh Filter
or
I 381-Micron Wire
Mesh Filter
9
The pump continues
operating although the
outlet valve is closed.
There is a leak at some point
of the outlet circuit.
Verify and tighten or repair.
Check if valve balls and/or
seats are worn.
Replace the worn items.
The pump does not
operate or cycles
once and stops.
Air valve is stuck or dirty.
Disassemble and clean the
air valve.
Check if valve ball is severely
worn and wedged in seat.
Replace ball and seat.
The pump operates
erratically.
Clogged suction line.
Verify and clean the
suction line.
Sticky or leaking valve balls.
Clean or replace.
Diaphragm ruptured.
Replace diaphragm.
Air bubbles in fluid.
Suction line loose or
damaged.
Verify and tighten or
replace.
Diaphragm ruptured.
Replace diaphragm.
Fluid in exhaust air.
Diaphragm ruptured.
Replace diaphragm.
The pump exhausts
air at stall.
Worn parts in air valve.
Repair or replace.
TROUBLESHOOTING
Ratio
1:1
Air Pressure Operating Range
22 to 115 psi (1,5 to 8 bar)
Maximum Suction Head
14.76 ft (4,5 m) dry
22.97 ft (7m) wet
Weight
15.87 lb (7,2 kg) metallic series with
Aluminum body
Fluid Inlet (single inlet)
1"BSP/NPT (F) and flange)
Fluid Outlet
1"BSP/NPT (F) and flange
PUMP TECHNICAL INFORMATION
AIR-OPERATED DIAPHRAGM PUMP DESCRIPTION
1:1 ratio, air-operated diaphragm pump with aluminum body and Buna N
diaphragms. This pump is recommended for transferring oil or evacuating waste oil.
