IP Power 9212 Delux, User Manual, Page: 36 / 41

IP POWER 9212 USER MANUAL
Example 1
：
control power on / off of 9212
：
http:// /admin:12345678@192.168.1.10/Set.cmd?
CMD=SetSPower=1A+YY=2006+MM=02+DD=16+HH=06+MN=02+SS=16+PARA
M=128+ONOFF=1
Above command control one IP Power 9212 IP address at 192.168.1.0, user name is
admin
and
password is
12345678
. This 9212 will connect relay1 (p60) on
2006/2/16 06:02
。
4. ReadPower
Read P6 ( relay status)
http://xxx/Set.cmd?cmd=getpower
Example 1.
http:// /admin:1234567@ 192.168.1.100/Set.cmd?CMD=GetPower
return message as follow:
P61=0,P62=0,P63=0,P64=0,P65=0,P66=0,P67=0,P68=0 HTTP/1.0 200 OK Connection: close
Read P6 (input status)
http://xxx/ Set.cmd?cmd=getio
example 2
http:// 192.168.1.100/ Set.cmd?cmd=getio
return message as follow:
P51=0,P52=0,P53=0,P54=0,P55=0,P56=0,P57=0,P58=0 HTTP/1.0 200 OK Connection: close
Note
：
1. Please use + to separate each parameter
，
you can only control certain relay connect &
disconnect as:
http://admin:12345678@192.168.1.10/ Set.cmd?CMD=SP60=1
3. Please follow the capital and lower case in command format.
4. You can use
http://xxx.xxx.xxxx.xxx/ ? To get http command help and check out the http the
command langrage.
VER. X.X, - 35 -