5
2 Quick Installation Guide
2 Quick Installation Guide
Step 1: Connect an Ethernet Cable to the AP
❶
Slide the bottom cover of the AP down to expose the port.
❷
Connect an Ethernet cable (≤ 60m), which will be connected to the PoE injector or a PoE
switch, to the
PoE
port of your AP.
❸
Gently replace the cover by sliding it up until it clicks into place.
Step 2: Mount the AP
Set up the AP in an outdoor location, usually
on the roof, and thread plastic wraps
through grooves underneath the brackets.
Then attach the device firmly to a solid pole.
Summary of Contents for AP515
Page 1: ...i 1 Product Overview...
