16/39
1.
：
Click this to enter the configuration settings for the IP Camera
2.
：
Click this button to take a snapshot of the IP Camera video image
3.
This will display the system time, video resolution, and video frame rate
4.
This allows you to select the video streaming source
(When stream 2 settings in the IP
Camera settings are disabled, this function will not display)
5.
If the IP Camera supports 2-way audio, you can click the “Chatting” check box
and then you can use a microphone which connects to the PC to talk to server
side, which is IP Camera side
6.
This displays the number of connected clients for this IP Camera
7.
This manually controls the relay output which is connected to this camera.
You can double-click the video to change to full screen mode. To exit full screen mode
press “Esc” or double-click the video again, it will change back to normal viewing
mode.
Right-Clicking the mouse on the video will cause a pop-up menu will be displayed.
1.
Snapshot
：
Click this to save a JPEG picture
2.
Record Start
：
Click this to record the video to the local PC. You will be prompted
to select a location to save the video file. To stop recording, right-click the mouse
again and click “Record Stop”. The recorded video format will be in the standard
AVI format playable with Microsoft Media Player.
3.
Mute
：
Click this to turn off audio. Click it again to turn it on.
4.
Full Screen
：
Click this to enter full-screen mode.
5.
ZOOM: Click this to enable the zoom-in and zoom-out functions. Click “Enable
digital zoom”, then drag the slider bar to adjust the zoom factor.
