Start address of Flash memory will be = 0x008000
End address of Flash memory will be
= 0x 8KB –1
= 0x 0x2000 –1
= 0x00A000 – 1
= 0x009FFF
Now start address of serial No will be
= 0x009FFF – 8 + 1
= 0x009FF8
Serial No. Base: - Here you can give the starting of the serial number. IO-FLASHER will
automatically increment the serial number depending upon serial No. increment By option
(Explain below in section xxxxxx)
e.g: - if Serial Number start from 0x1100000000000000
Increment By option selected as 1
The
serial
number
will
be
0x1100000000000000,
0x1100000000000001,
0x1100000000000002,
0x1100000000000003,
0x1100000000000004,
0x1100000000000005……….and so on
Increment By – If you are using multiple programmer for production than you can use
Increment by option for serial number.
For Example, if you are using 3 programmer A, B, C.
A Serial base = 0x1100000000000000
B Serial base = 0x1100000000000001
C Serial base = 0x1100000000000002
Increment By option should be selected as 3
Now
serial
number
programmed
by
A
will
be
0x1100000000000000,
0x1100000000000003,
0x1100000000000006,
0x1100000000000009,
0x110000000000000B ……… and so on
serial number programmed by B will be 0x1100000000000001, 0x11100000000000004,
0x1100000000000007, 0x110000000000000A, 0x110000000000000C ……… and so on
serial number programmed by C will be 0x1100000000000002, 0x1100000000000005,
0x1100000000000008, 0x110000000000000B, 0x110000000000000D ……… and so on