AVXP1 Owner Manual
7
6.
DIMMER PORT
Use to connect a jack cable between AV1 or AVX1 and AVXP1 ports (or
IOTA
VX
dimmer
equipped products) to synchronize the lighting of each unit. AV1 or Pre-Amp is the master. The
cable is delivered with AV1 or AVX1.
7.
AC INPUT
Use to connect to AC power.
8.
POWER SWITCH AND FUSE INSTALLING POSITION
Control main power switch and replace the fuse if damaged.
Installation
Speaker Connections
1)
Connect to multi-channel processor
The AVXP1 provides 2 methods for connecting to AV1 or AVX1 or other Audio Video Processor.
Choose one of the following:
a)
Unbalanced connecting (refer to zone 5 of back panel picture)
b)
Balanced connecting (refer to zone 3 of back panel picture)
2)
Connect the speakers to the amplifier
a)
Unplug the power cable before connecting.
b)
Follow instructions attached to the speaker.
c)
Ensure that the negative pole and positive pole are correctly connected.
d)
Do not connect a speaker to multiple connectors.
e)
A very long speaker cable or a speaker cable not suited to your setup may affect
performance and should be avoided.
f)
Incorrectly connected speakers may cause a short circuit, which in turn may damage
the amplifier.
g)
Metal core wire of the cable touching the rear panel may damage the amplifier.
h)
Connecting more than one cable to each speaker connector may damage the
amplifier.
Speaker Room-setting Reference
The following picture shows where a 7.1 speakers configuration (7 speakers and one subwoofer)
should be placed. User can adjust the position according to the number of speakers owned. If
the user only has one speaker to be put in the rear, put it between the two speakers as shown in
the picture.
