DEVICE POWER SUPPLY AND CONNECTION TO THE LOAD
2AMIN637WPS CONNECTION DIAGRAM - FIGURE N. 1
The 2AMIN637WPS dimmer has to be powered according to the polarity showed in FIG. 1
In particular:
- connect the power source to the Input L and N terminals
- connect the load LOAD 1 between the Output L1 and N terminals
- connect the load LOAD 2 between the Output L2 and N terminals
- connect a normally open button PUSH 1 (N.O.) between L (line) and P1 terminals
- connect a normally open button PUSH 2 (N.O.) between L (line) and P2 terminals
The LED (LED POWER) positioned on the circuit board indicates the presence of power supply and the status of
Wifi Connection
4
IOTLIGHT - User Manual 2AMIN637WPS
