LED Display
Troubleshooting
no radio link leD
radio lInK leD is on but link Quality Indicator is low
no ethernet lInK leD
still not working?
no Power leD
Check the power connections.
The radio is looking for its matched partner. If both units are powered up and the Power LEDs are active, they may be too far away to create the
radio connection. Try other locations that may have a less obstructed path or try to reorient the antennae.
Yagi type
antennae get their best
range when they are oriented to point directly at each other with the antenna elements oriented in the same place (eg. vertically or horizon-
tally).
The units may be too far away to create a good radio connection. Try other locations that may have a less obstructed path, or try to reorient the
antennae.
Check your network connections.
Temporarily use an Ethernet cable to see if the network is working over a wired connection. If an Ethernet cable does not work then the prob-
lem is with the network.
etherWave-WeB
User’s Manual
PaGe 4
Phone
:: (877) 343-8467
www.ioselect.com