1. Introduction
This Quick Start Guide shows you how to set up the ioSafe Solo G3 Secure, an app-controlled,
hardware encrypted, fireproof and waterproof external storage device that's OS-independent
and controlled via an Apple or Android device. For information on troubleshooting, please
download the User Manual at
iosafe.com/support/product-manuals
.
2. Install the App
Download the SecureData User app onto your phone or tablet from either the Apple App Store
or Google Play.
3. Add the G3 Secure to the App
IMPORTANT
The eight-digit Device ID is required; it is printed on the rear of the ioSafe
Solo G3 Secure.
1. Connect the G3 Secure to your computer's USB 3.1 port with a USB 3.1 cable.
2. Open the SecureData User app.
3. Tap the in the top left corner if you don't see the G3 Secure in the list. If you do see the
G3 Secure in the list, continue onto the next section.
4. Tap the drive name that appears and follow the app instructions.
5. Tap Continue and follow the app instructions.
4. Unlock the Drive
CAUTION
After 10 consecutive attempts to unlock, the drive will be erased and
reset to factory default settings, resulting in loss of data settings, and
password.
ioSafe Solo G3 Secure Quick Start Guide
3