7
Safety Instructions
For optimized cooling during normal operation, keep out of from direct sunlight. During a high
temperature event such as a fire, the internal HDD’s are protected from data loss
(
1550
°
F, 30
minutes per ASTM E-119
)
when the Front Cover is properly installed on the device. Please contact
ioSafe (http://iosafe.com
)
for assistance during any data recovery event.
During normal operation, do not place the ioSafe product close to any liquid. During a flood or water
exposure (10’ depth, full immersion, 3 days
)
the internal HDDs are protected from data loss when
the Waterproof Drive Cover is sufficiently tightened to the internal HDD chassis. Please contact
ioSafe (http://iosafe.com
)
for assistance during any data recovery event.
Before cleaning, properly shut down by pressing and holding the front power button then unplug the
power cord. Wipe ioSafe product with moist cloth. Avoid chemical or aerosol cleaners for cleaning as
they may affect the finish.
The power cord must plug in to the right supply voltage. Make sure that the supplied AC voltage is
correct and stable.
To remove all electrical current from the device, ensure that all power cords are disconnected from
the power source.
Observe electrostatic discharge (ESD) precautions during the entire installation process to eliminate
possible ESD damage to the equipment. Wear an approved ESD wrist strap that is grounded when
you handle an ESD-sensitive device.
CAUTION: Risk of Explosion if battery is replaced by an incorrect type.
Dispose of used batteries according to their instructions
