
8
[email protected] | www.ionodes.com
3
Cleaning Instructions
To clean the surface of the equipment, carry out the following instructions:
1. Shut down your equipment and unplug the power adapter.
2. Gently wipe the surface with a damp, soft, lint-free cloth.
3. Avoid getting moisture in any opening.
Note:
Do not use abrasives, water, thinners, solvents, aerosol cleaners (spray polish), or any
aromatic solvents, etc. that may enter through holes in the equipment and cause damage.
4
Handling Notes
When shipping the product, the original shipping carton and packing materials should to be used. For
maximum protection, repack the unit as it was originally packed at our factory.
Do not use volatile liquids, such as insect spray, near the unit. Do not leave rubber or plastic products in
contact with the product for long periods of time. They will leave marks on the surface finish.
5
Moisture and Condensation Notes
Moisture condensation will damage the product. Read the following notes carefully.
Moisture condensation can occur in the following situations:
•
Transferring the product directly from a cold place to a warm place.
•
Using the product in a room where you just turned on the heater, or a place where the cold wind
from an air conditioning unit directly hits the product.
•
In the summer, when moving the product to a hot and humid place after leaving an air-conditioned
space.
•
Using the product in a humid environment.
Do not use the product when moisture or condensation may occur. If the product is used in such an environment, it
may damage discs and internal parts.