9/9/22, 2:54 PM
Ionmax Rhine user manual
https://ionmax.com.au/blogs/manuals/ionmax-rhine
10/27
Note: If the unit has been switched off and on again, it will resume operation in the same
mode selected from its last use.
Mode button
Press the Mode button to choose between different modes. The corresponding mode’s
indicator will light up when selected:
Sleep mode
In sleep mode, the power indicator, sleep mode indicator, digital display and
other indicators will be disabled. Normal display will resume if other buttons
are pressed.
Fan mode
In fan mode, only the unit’s fan will be functioning and not the compressor.
Fan speeds can be adjusted while humidity levels cannot. The room’s
humidity will be shown on the digital display.
Auto mode
This is the unit’s default mode for dehumidification.
In Auto mode, the unit’s fan and compressor settings will be automatically
controlled until the set humidity level has been reached.
Once the set humidity level is reached, the compressor will stop operating
and the fan will stop after a 30-second delay.
Both the fan speed and desired humidity level can be set in Auto mode.
