8
9
101M
oPeraTion
To operate your Therapure
®
101 air purifier, rotate the Speed Knob to the speed of your choice to
activate your air purifier. There are three speed settings controlled by the Speed Knob. The different
settings are
LOW
,
MED
and
HI
. Turn the Speed Knob to rotate through the settings and select the
setting you desire.
Your Therapure
®
101 air purifier has triple action purification.
First,
the Permanent HEPA type Filter
removes pollutants such as dust, pollen, smoke and pet dander from the air.
Second,
the powerful
UV technology kills airborne germs, bacteria, viruses, mold and mildew.
Third,
the photo catalyst
filter removes odors and toxic chemicals and fumes.
cleaning & MainTenance
With very little effort, the Therapure
®
101 air purifier delivers cleaner, fresher, sanitized air to your
indoor environments.
Keep your Therapure
®
101 functioning properly by cleaning the Permanent HEPA type Filter. More
frequent cleaning will be necessary if the unit is located in an area with a high level of airborne
contaminants (excessive amounts of smoke, pet dander, etc.).
Exposing your Therapure
®
to candle/oil/fireplace soot and smoke is not recommended and will
require more frequent cleaning.
Remember: Always make sure your air purifier is turned off and unplugged before cleaning.
Cleaning the Permanent HEPA type Filter
a. Clean the Permanent HEPA type Filter after each month of use.
b. Be sure to turn off and unplug the unit before cleaning.
1. Release the inlet grill by pressing on the Locking Latch (see diagram of Main Parts).
2. Remove the inlet grill from the unit as shown below.
3. Grasp the left and right frames of the Permanent HEPA type Filter through the indentations on
the sides of the filter enclosure and remove the filter.
4. To clean the Permanent HEPA type Filter, use the brush attachment with your vacuum cleaner.
Run the attachment along the inlet and outlet side of the filter, cleaning between the crevices as
much as possible.
Do not use water or any household cleaners or detergents to clean the
Permanent HEPA type Filter.
Control Panel
1.
2.
4.
3.
