6
Operation
Recording Video
1.
directions. When all connections have been made properly,
you will see a preview of your connected device on your screen.
Note:
If no micro SD card is inserted, your screen will show
No Card Disk
.
2.
Press the
Record
button. The LED will begin flashing red to indicate recording is
active.
3.
Press the
Record
button again to stop recording. The recording LED will stop
flashing and your screen will show
Saving File
.
Note:
After 2 hours and 42 minutes of recording, Video 2 SD will automatically
save the file and start recording to a new file.
Saving Files
1.
Use the included mini-USB cable to connect the
DC Port
on Video 2 SD to an
available USB port on your computer.
2.
Press and hold the
Record
button for 3 seconds to switch Data mode. If
connected to a screen, the screen will show
DATA
and a USB drive picture.
3.
You can now access the micro SD card from your computer as an external drive.
4.
Files will be automatically saved to the micro-SD card using default file names.
You can copy these files to your internal hard drive for viewing in standard media
software.
You can also remove the micro SD Card from Video 2 SD and insert it directly into
your computer or a compatible SD card reader.
Summary of Contents for Video 2 SD
Page 17: ...17...