![ION Superior LP Quick Start Manual Download Page 6](http://html1.mh-extra.com/html/ion/superior-lp/superior-lp_quick-start-manual_2087419006.webp)
6
Rear Panel
1.
Line Output:
Connect this output to a
receiver, amplifier, or powered speakers.
Note:
Superior LP’s volume control will not
adjust the volume when the line output is in
use.
2.
Power Input:
The integrated power cable
is connected here.
3.
FM Antenna:
Adjust this wire for better FM
radio reception. For AM reception (US/CA
units only), rotate the unit until the best
reception is found.
Recording
Recording from a CD
1.
Set the
Function
selector to
CD/USB
.
2.
Insert the USB flash drive into the USB port.
3.
Press the
Record
button. “REC” will flash on the display for 3 seconds and then show “ONE”. Press
the
Backward/Forward
button to select to record “ONE” track or “ALL”
tracks and then press the
Record
button to confirm.
4.
Press the
Backward/Forward
button to select the track and then press the
Record
button to
confirm. “REC” and “Track No.” (track number) will be alternately displayed to indicate the track is
being recorded.
5.
Press the
Stop
button to stop recording.
Note:
Some original CDs may not be recordable if they are copy-protected.
Recording from a MP3 Disc
1.
Set the
Function
selector to
CD/USB
and insert the MP3 disc in the CD tray.
2.
Insert the USB flash drive into the USB slot.
3.
Press the
Record
button. “REC” will flash on the display for 3 seconds and will then show “ONE”.
4.
Press the
Backward/Forward
button to record “ONE” track, “FOL”
(a folder) or “ALL”
tracks. Press
the
Record
button to confirm. “REC”, “folder number”, and “number of total tracks” will be alternately
displayed, indicating that it is being recorded.
5.
Press the
Stop
button to stop recording.
Recording from the Turntable
1.
Set the
Function
selector to
Phono/Aux In
.
2.
Insert the USB flash drive into the USB slot.
3.
Lower the tonearm to the desired location on the record.
4.
Press the
Record
button. “REC” will flash on the display for 3 seconds and then, “REC” and “PHO”
will be alternately displayed to indicate that it is being recorded.
5.
Press the
Stop
button to stop recording.
Recording from the Radio (FM Band only)
1.
Set the
Function
selector to
Radio/Bluetooth
.
2.
Insert the USB flash drive into the USB slot.
3.
Select the FM radio station using the
Frequency Selector
dial.
4.
Press the
Record
button.
5.
Press the
Stop
button to stop recording.
Recording from a Cassette
1.
Insert the USB flash drive into the USB slot.
2.
Set the
Function
selector to
Tape/Off
.
3.
Insert the tape with the thicker side of the tape facing to the right of tape tray. The cassette will play
automatically.
4.
Press the
Record
button. “REC” will flash on the display for 3 seconds and then, “REC” and “TAP”
will be alternately displayed to indicate that it is being recorded.
5.
Press the
Stop
button to stop recording.
1
2
3
LINE OUT