background image

 ARA DOCK4 User Manual V1.0 

P

ion

eering Gas Sensing Technology.

 

Page 4 of 15 

ionscience.com

 

Do not expose the ARA DOCK4 to electrical or mechanical shocks before, during, or 
after use. 

Do not allow liquids to enter the dock or into the flow path. 

Ensure the ARA DOCK4 is used with certified calibration gas. 

Do not use expired calibration gas.

 

Do not attempt to disassemble, adjust, or service the equipment unless 
instructions are provided to perform a procedure in this manual.

 

Do not charge the battery in temperatures above or below the specified range of 0

 to 40

 

Disposal 

The equipment does not include any toxic materials, but if it has been contaminated by toxic
materials, then exercise due care and follow the appropriate regulations when disposing.

Always adhere to local regulations and procedures when disposing of the equipment.

ION Science Ltd offers a take back service.  Please contact us for more information.

RECYCLING 

The detector contains a lithium battery that must be disposed in an appropriate 
recycling bin. 

WEEE REGULATIONS 

Ensure that electrical equipment is disposed of correctly. 

Normal Operating Conditions 

The ION ARA DOCK4 is designed to be safe in the following conditions: 

-

Indoor use only;

-

Normal atmosphere (20.9% v/v O2) that is free of hazardous gas;

-

Temperature range of +5°C to +40°C (+41°F to +104°F) ; and

-

Relative humidity of 10% to 90% non-condensing.

If the intended operating environment does not match these criteria, ION Science recommends that 
you consult a qualified professional specialist prior to installing and using ION ARA DOCK4.  

Summary of Contents for shawcity ARA DOCK4
















Reviews: