ION PA System Port Campus Quick Start Manual Download Page 2

 

QUICKSTART GUIDE (ENGLISH) 

 
1.  Make sure all items listed on the front of this guide are included in the box.

 

2. 

READ SAFETY INSTRUCTION BOOKLET BEFORE USING THE 
PRODUCT. 

3. 

MAKE SURE THAT YOU HAVE COMPLETELY CHARGED THE 
BATTERY PRIOR TO FIRST USE FOR MAXIMUM BATTERY LIFE. 

4.  Study this setup diagram.  
5.  Make sure all input devices such as microphones, CD players, or mp3 

players are turned off and volume settings are set at "zero."  

6.  Connect all devices as shown. 
7.  Switch everything on in the following order: 

 

audio input sources (i.e. microphones, instruments, CD/MP3 Players) 

 

TAILGATER BLUETOOTH

®

 

8.  When turning off, always reverse this operation: 

 TAILGATER 

BLUETOOTH 

  last, any input devices 

 

Go to 

http://www.ionaudio.com

 for product registration. 

 
 
 

 
 
 
 
 

 
 
 
 
 
 
 
 
 
 
 
 

RECHARGEABLE BATTERIES

 

 
Rechargeable lead-acid batteries are the same type used in automobiles. As with your car battery, how you use this battery has 
a significant impact on its lifespan.  With proper use and treatment, a lead-acid battery can last for years. Here are some 
recommendations for getting the longest life from the internal battery. 
 

GENERAL USAGE

 

 

FULLY CHARGE THE BATTERY BEFORE USING IT. 

 

CHARGE THE BATTERY COMPLETELY AFTER EACH USE. 

 

AVOID COMPLETELY DRAINING THE BATTERY. 

 

You may leave the unit plugged in for up to two weeks. 

 

For maximum life, drain the battery 80% once a month. 

 
STORAGE 

 

Avoid storing in high temperatures and moist places. 

 

For long-term storage, periodically recharge the battery. 

 

If you do not charge the battery for six months, it may not charge.

 

 
REPAIR 

 

As the battery nears the end of its life, it may lose its ability to recharge. If this occurs, contact ION Audio technical 
support at www.ionaudio.com/supporthome.    

 
DISPOSAL

 

 

Bring the unit to a recycling center or dispose of in accordance with local ordinances. 

 

BOX CONTENTS

ƒ

 TAILGATER 

BLUETOOTH 

ƒ

 

Microphone with mic cable 

ƒ

 

1/8" to 1/8" cable 

ƒ

 

Power Cable (standard IEC) 

ƒ

 Quickstart 

Guide 

ƒ

 

Safety Instructions & Warranty 
Information Booklet

REAR PANEL 

POWER 

TOP PANEL 

MICROPHONE 

iPhone

®

 (not included)  

iPad is a trademark of Apple Inc., registered in the U.S. and other countries. 
 

The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such
marks by ION Audio is under license. Other trademarks and trade names are those of their respective owners. 

MP3 PLAYER 
(not included) 

Summary of Contents for PA System Port Campus

Page 1: ...ing the mini to mini cable provided whenever possible Wireless connectivity is compromised if there are multiple Blue tooth devices present Make sure battery is completely charged before use After each use charge the battery completely Avoid completely draining the battery ...

Page 2: ...the internal battery GENERAL USAGE FULLY CHARGE THE BATTERY BEFORE USING IT CHARGE THE BATTERY COMPLETELY AFTER EACH USE AVOID COMPLETELY DRAINING THE BATTERY You may leave the unit plugged in for up to two weeks For maximum life drain the battery 80 once a month STORAGE Avoid storing in high temperatures and moist places For long term storage periodically recharge the battery If you do not charge...

Page 3: ...e your iPad or other device from the cradle before transporting or traveling with TAILGATER 11 Antenna Adjust this telescoping FM antenna to get the best radio reception Note To prevent accidental damage we recommend rotating the antenna only when it is extended horizontally Also retract the antenna when the Tuner is not in use Note When using AM radio if you have a Bluetooth device that is paired...

Page 4: ...the music volume from your source PAIRING A BLUETOOTH DEVICE 1 Turn on your Bluetooth device 2 Power on TAILGATER BLUETOOTH and it will automatically go into pairing mode to search for Bluetooth devices You will know you are in pairing mode when the LED is blank 3 If your Bluetooth device is not able to pair to the amp press the disconnect button on the amp to break previous Bluetooth connections ...

Reviews: