1.
AUTO STOP ON/OFF switch
2.
33/45/78 RPM switch – This switch controls the speed of the turntable platter.
3.
Bluetooth Button---Press this button to start Bluetooth pairing. If after 5 minutes no
Bluetooth speaker can be found to pair with, the Bluetooth transmitter will become
inactive and the LED will turn off. If currently connected, press this to disconnect from a
currently connected Bluetooth device.
4.
AUX IN jack
5.
Bluetooth Volume-Adjust this to control the Bluetooth output level
6.
Power on/off and volume control knob --Adjust this to control the unit output level and
power on off.
7.
Headphones jack —to connect headphones or earphones to enjoy music privately
8.
Stylus—there is a white stylus protector covering on the stylus, remove it before use.
9.
Tone arm – The turntable comes with a ready to use pre-balanced tone arm and cartridge.
10.
Platter – Place your record here.
11.
45 RPM adapter –used for 45RPM vinyl records
12.
USB Audio output: Use the included USB cable to connect your turntable to your
computer to record music from vinyl to your computer.
13.
DC IN port – Used to connect power adapter
14.
RCA output – Used to connect to external speakers (not included)
GETTIING STARTED
Fix the dust cover onto the turntable.
Firmly and securely insert the DC plug of the adaptor to the DC IN Jack on the back of the
unit.
Plug the adaptor’s AC plugs into a power outlet.
VINYL RECORD PLAYBACK
1. Turn the power & volume control knob clockwise. The indicator light will illuminate red.
2. Place a record on the turntable platter and select the desired speed (33/45/78) according to
the record.
NOTE: when playing a 45RPM record, use the included 45RPM adapter located in the holder
besides the platter (one more 45RPM adaptor can be found in the accessory bag).
3. Remove the stylus protector. Open the tone arm clip to release the tone arm. Push the lift
lever (it is besides the auto stop switch) backward to raise the tone arm and gently move the
tone arm to the desired position over the record. You can turn the pitch control knob to adjust
the speed of the platter little by little. The turntable will begin to spin when the tonearm is
moved toward the record (when the AUTO STOP switch is ON). Push the lift lever forward to
lower the tone arm slowly onto the desired position on the record to start playback.
(Note: when you push the lift lever forward, do not push it beyond the position of the tone
arm clip)
4. If the Auto Stop Control Switch is turned ON, the record will stop automatically when
finished. If Auto Stop Control Switch is turned OFF, the record will NOT stop automatically
when finished.
