6
Operation
Pairing a Bluetooth
®
Device
1.
Turn on your Bluetooth
®
device.
2.
Power on Adventurer
™
. If you have previously connected to another Bluetooth
®
device,
Adventurer
™
will reconnect. Press and release the
Bluetooth
®
button
to disconnect the
paired Bluetooth
®
device.
3.
Press and release the
Bluetooth
®
button
again to pair to a Bluetooth
®
device.
4.
Navigate to your Bluetooth
®
device’s setup screen, find “
Adventurer
™
” and connect.
Note:
If your Bluetooth
®
device prompts for a pairing code, enter “
0000
”.
5.
To disconnect the paired Bluetooth
®
device, press the
Bluetooth
®
button
.
6.
To connect to another Bluetooth
®
device, repeat steps 3-4.
Tip:
If you would like to disable (or enable) the voice prompts, double press the
Bluetooth
®
button
.
Linking Two Speakers
If you would like to play music from a Bluetooth
®
device, you can first “link” two Adventurer
™
s
together in order to listen to your music in stereo. One Adventurer
™
will serve as the left
speaker and the other will serve as the right speaker. The speakers should be within 50’ (15.2
m) of each other to properly link.
To link two Adventurer
™
speakers together:
1.
Press and hold the
Link
button
on both speakers to enter Stereo-Link mode. You will hear
a tone, and the word
LINK
will flash on each speaker’s
Display
while they search for each
other. Once a link has been established, the word
LINK
will remain on the
Display
.
Note:
The linking process can take up to a minute to complete. The closer the two
speakers are to each other, the quicker the link is established.
2.
Once the two speakers are linked, press and release the
Bluetooth
®
button
on either
speaker to begin the Bluetooth
®
pairing process. The speaker you use for Bluetooth
®
pairing will serve as the primary (Left channel) speaker. On its
Display
screen, the
Bluetooth
®
icon will flash to indicate that Bluetooth
®
pairing is in process.
3.
Navigate to your Bluetooth
®
device’s setup screen, find
Adventurer
™
and connect. When
your Bluetooth
®
device is connected, the Bluetooth
®
icon will be lit solid on the primary
speaker’s
Display
, and you will be able to play audio from the Bluetooth
®
device through
your two linked speakers.
4.
To unpair the Bluetooth
®
device, press and release the
Bluetooth
®
button
on the primary
speaker. To disconnect two speakers or cancel linking between the two, double press the
Link
button
on either speaker.
