Iomega StorCenter Pro NAS 150d, Manual

Page: 30 / 70

Device Settings
Home
User Management
Group Management
Shared Folder Management Disk Management
Network
Disk Backup
Print Server
Print Server
Print Server— Enable/Disable the print server. The StorCenter Pro server is capable of
sharing one USB printer with other systems on your network. Printer sharing is automatic
and the StorCenter Pro server does not require any special configuration; however,
each
client computer must be configured to use the printer .
Connecting and disconnecting a printer causes the StorCenter's Samba (SMB file sharing)
service to restart. When this service restarts, all current connections will be interrupted. Your
computer should automatically reconnect to the share once the service has been restarted. If
your connection is not restored, use the Iomega Discovery Too Pro software to reconnect to
the StorCenter.
CAUTION! Do not connect or disconnect printers while the StorCenter is performing a data
transfer. When the connection is severed, the data transfer will be interrupted and data may
be lost.
| top of page |