Iomega px4-400d User Manual Download Page 73 | Manualshive

Page: 73 / 168

background image

Sharing Content through the Home Page

Sharing Your Content with the World

When you set up the Home Page for your px4-400d Network Storage, you are presenting content to
anyone who accesses your px4-400d from an internet browser. That content includes a slideshow and
Shares where you have set access permissions for Everyone.

You can manage the look of the Home Page by using the Home Page Settings feature. This allows you to
display a slideshow, display public Shares, name the Home Page, and turn the Home Page on or off.

1. Click the Home Page Settings icon.

2. Click the slider switch to On to enable the Home Page on your px4-400d.

3. Select Default home page settings.

4. Enter a title for the Home Page. This title displays in the top banner of the Home Page when users

access the px4-400d. If you leave this field blank, the default device name is used.

5. Check Display Shares to display publicly accessible Shares. When you select to display

Shares, users will see all Shares where you have set access permissions for Everyone.

6. Check Display slideshows to display picture slideshows that are in folders on the px4-400d.

Click Manage slideshows to configure any slideshows you want to display. The slideshow
location can be any folder attached to the px4-400d, including a USB drive or

.

7. Click Apply to save your changes, or click Cancel to discard your changes.

Deleting a Slideshow

To delete a slideshow from the list of available slideshows, click

. After you delete a slideshow, you

can configure a different one.

Custom Home Page Content

For information on custom home page content, refer to

Adding a Custom Home Page

Adding a Custom Home Page

You can customize the look of the home page for your px4-400d Network Storage to include html pages
and client-side scripting, such as Javascript. This customized home page replaces the default home page
on the px4-400d. In addition, there are applications available on

www.lifelineapps.com

that can enhance

your home page content.

You add your custom html content to a Share on your px4-400d and then specify its location on the Home
Page Settings page.

Sharing Files

63

Sharing Content through the Home Page

«
...
71
72
73
74
75
...
»

Summary of Contents for px4-400d









































































































































































Reviews:

No comments

Related manuals for px4-400d

Brand: Hama Pages: 4

Brand: National Instruments Pages: 11

Nighthawk M6 Pro

Brand: AT&T Pages: 2

Brand: Hama Pages: 12

Brand: TP-Link Pages: 2

Fast SwitchHub-8mi SNMP

Brand: Accton Technology Pages: 13

Brand: Sangamo Pages: 2

Brand: u-blox Pages: 29

Brand: B&B Electronics Pages: 2

Brand: ICP DAS USA Pages: 8

Brand: UHP Pages: 15

Brand: Ubiquiti Pages: 21

Brand: eWON Pages: 34

Brand: INNOSILICON Pages: 11

Brand: NZXT Pages: 2

Brand: Connectland Pages: 10

Brand: Magewell Pages: 10

Brand: Z3 Technology Pages: 18

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands