driv
e
1
GB
SCSI
SCSI
SCSI
SCSI
SCSI
Installation Guide
Check your SCSI
(Small Computer System Interface)
connection.
Your computer MUST have an
internal
SCSI adapter or
connection for the Jaz drive.
•
If you plan to use an Iomega SCSI adapter
, install it NOW
using the installation guide shipped with the adapter; then
return to step 2 below. If you need to purchase an adapter,
call your Iomega dealer or 1-800-MY-STUFF.
•
If you plan to use a non-Iomega SCSI adapter
,
refer to
"Non-Iomega SCSI Adapters" in the
Jaz User's Guide
.
M
Windows NT Users
You may need to install driver software for
your SCSI adapter. Refer to NTReadme.txt on the Windows NT Install
diskette for additional information.
M
Unpack the Jaz drive and accessories.
CAUTION
Before handling the Jaz drive, touch a grounded metal
object (like an unpainted metal screw on your computer) to
discharge any buildup of personal static electricity.
M
Manuals and Install Diskettes
Jaz Drive
Jaz "tools" Disk
(contains Jaz Tools software)
Data Cable
3.5" Universal Installation Kit
(includes mounting screws)
3.5" UNIVERSAL INSTALLATION KIT
1
GB
1
GB
tools
Install
Windows/
DOS
Install
Windows/
DOS
Turn OFF the computer power switch, and
DISCONNECT the computer power cord.
WARNING
Always disconnect computer electrical power before
beginning a computer hardware change.
M
Remove the cover from your computer.
(Refer to
your computer manual if removal is unclear.)
Disconnect
power
Locate a vacant 3
1
/
2
-inch
or
5
1
/
4
-inch drive bay.
See
notes in illustration for the next step
.
3
1
/
2
-inch Bays
(after selecting bay,
go to step 6)
5
1
/
4
-inch Bay
(after selecting bay,
go to step 5a)
5
1
/
4
-inch drive bays ONLY:
Use the 3.5" Universal Installation Kit to assemble a 5.25"
mounting bracket and attach it to the drive, then go to step 6.
M
Instructions
for assembling the mounting
bracket are printed on the box.
M
Installation Guide
1
2
4
5
5
a
Attach the left rail 1 to the faceplate 3 insert bottom
tab first, then repeat process for the right rail
Attach the DC cable 4 onto the connector of the disk drive.
Slide the disk drive into position, aligning the
bottom holes of the disk drive with posts of the bracket
assembly. Verify that no gaps are present on the faceplate.
Align the disk drive retaining clip 5 over the center of the disk
drive as pictured. Slightly flex the drive clip and push down until
both clip tabs engage the slots on the bottom of each rail.
NOTE: 6 Screws were provided in this kit to further secure
the brackets to the disk drive if desired,
however THIS IS NOT A NECESSARY STEP!
1–
2–3–
4–
3
Iomega's Automated Help Systems
Internet Home Page:............................................................
http://www.iomega.com
America Online™................................................................
Keyword:
Iomega
Microsoft Network...............................................................
GoWord:
Iomega
Automated FAX Help (U.S. & Canada only).....................
1-801-778-5763
Automated E-Mail................................................................
(Please type "Jaz" in the subject header when sending your E-Mail)
Iomega Bulletin Board.........................................................
1-801-778-5888
8,N,1; 9600 baud and above; ANSI (24 hrs - Download only)
Repair and Return Information...........................................
1-801-779-6100
(No technical support information is available at this number.)
One-on-One Iomega Technical Support
One-on-One Technical Support is free of charge for issues Iomega determines
relate to a defect in an Iomega product. Other issues are charged at the rate of
$19.99 per incident for Jaz products. You can call 1-888-4-IOMEGA, toll-free,
to charge the support cost to your credit card (VISA, MasterCard, American
Express, or Discover), or you can call 1-900-988-4747 to put the support cost
on your phone bill. Either way, the charge will be reversed if your issue is found
by Iomega to be due to a product defect.
Iomega's technical support associates are ready to take your call Monday
through Friday from 6 a.m. to 6 p.m. Mountain time (U.S. & Canada only).
European Support Numbers
Refer to the electronic manual included with your Jaz software package for a
complete list of European support numbers.
EN143604
Printed on recycled paper
®
© 1997 Iomega Corporation. Iomega, the Iomega logo and Jaz are registered trademarks of, and the graphic
swirl, hand, and eye are trademarks of, Iomega Corporation. All other product and brand names are the
property of their respective companies.
