6. Push the Buz card FIRMLY into the PCI slot, then replace
the PCI slot cover screw.
Bracket
flush to chassis
Connector fits evenly
PCI slot
Ensure the bracket fits flush against the chassis. If you currently have an Iomega Jaz
®
Jet
®
SCSI
adapter card on your system, we recommend replacing it with the Buz card now. See caution
below. The connector should seat evenly on both ends of the PCI slot to ensure a good
connection.
CAUTION
Do not connect a SCSI boot drive or SCSI CD-ROM drive to the Buz card until
after you have installed the Buz software.
왎
왎
Internal drive installation:
If you are connecting an internal SCSI drive to the SCSI
connector on your Buz card, you may want to install or connect it at this time. Install your
software first or your computer may not recognize the Buz card or any other drives you
connect to it
.
왎
7. Replace the computer cover. Do not plug your
computer in or start your computer yet! Proceed to the
Buz box connections on the next page.
5
