background image

2

1

Panel Introduction

Jumper

Key lock

Power Indicator and HDD Access Indicator

To remove the tray, grab the mobile tray firmly 

and pull the tray from the housing gently.

How to Install the SATA HDD

2-1

1-1

1-2

2-2

Installation Guide

Mirror Drive

To install the SATA HDD, simply place the HDD 

inside the tray as illustrated below. (A stopper in 

the rear of the tray is provided to avoid careless 

handling.)

After placing the HDD inside the tray, adjust and 

secure the HDD with the provided screwdriver 

and four hex-head #6-32 UNC screws.

SATA connector

1. RAID Setting Switch
2. FireWire Connector

3. USB B Connector
4. DC Power Jack (12V/4.16A)
5. Power Switch
6. Cooling Fan

7. Key lock
8. SATA HDD Mobile Tray
9. HDD 1 Status LED 
    (Green & Red)
10. HDD 2 Status LED 
      (Green & Red)

1-3

1-4

To insert the tray, grab the mobile tray firmly and push 

the mobile tray back into the housing.

 A

 B

Security status

Locked (Non-removable)

Unlocked (Removable)

Status

Segment

B

A

 

According different statuses, the indicator displays are as followed:

- Non-RAID: for one or two disks 

- RAID 0 (Striping): for two disks with same capacity. 

- Disk Spanning: for two disks with different capacity. 

- RAID 1 (Mirroring): for two disks with same capacity. 

1

2

3

4

5

6

9

10

Normal State

HDD 1 Failed

HDD 2 Failed

HDD 1 under Rebuilding

HDD 2 under Rebuilding

HDD Duplicating 

is completed

Green

Green

Green

Green

Green

Red

Red

Green

Red/Orange Green

Blinking

Blinking

Green Red/Orange

Blinking

Blinking

Status

Display

 A

 B

How to Remove and Insert the Mobile Tray

 A

 A

To unlock the tray, insert the key and push to turn 

the lock to Position A.

Note: The key cannot be removed when the lock is in Position A.

HDD1

HDD2

To lock the tray in place, turn the lock back to 

Position B.

Note: The key can be removed while the lock is in Position B.

 B

 B

7

8

FWBU2SATA35DMR/UF2SATA35DMR/UFISATA35DMR/U2SATA35DMR

FireWire-6pin (only for UF2SATA35DMR)

Bilingual-9pin (only for FWBU2SATA35DMR)

FireWire-6pin + iLink-4pin (only for UFISATA35DMR)

2

1

T-shape screw driver 

Hex-head #6-32 UNC 

2

Summary of Contents for FWBU2SATA35DMR

Page 1: ...ble Unlocked Removable Status Segment B A According different statuses the indicator displays are as followed Non RAID for one or two disks RAID 0 Striping for two disks with same capacity Disk Spanning for two disks with different capacity RAID 1 Mirroring for two disks with same capacity 1 2 3 4 5 6 9 10 Normal State HDD 1 Failed HDD 2 Failed HDD 1 under Rebuilding HDD 2 under Rebuilding HDD Dup...

Page 2: ... E N136 Q03305 KETI HU10170 3001 Made in China EL D33190 5V 5V RTN RTN 12V 12V CAUTION RISK OF ELECTRIC SHOCK DRY LOCATION ONLY INDOOR USE ONLY Turn on Turn off Note Push the power switch to turn off the power before you attach the DC Power plug to the DC input How to connect the mirror drive and the computer USB A plug to B plug cable FireWire plug to FireWire plug cable Beta plug to Beta plug ca...

Page 3: ...ither USB or FireWire IEEE 1394 HDD1 HDD2 Pre Requisites for Disk Mirroring Although It is preferable that drives share the same manufacturer and model type it is not mandatory Target Drive must be equal or bigger capacity than the Source Drive Note Any data on the HDDs will be lost Installation Guide Mirror Drive To partition and format a disk connect the Mirror Drive to the host through USB or F...

Page 4: ...ive for the data and software See 1 1 to 1 4 for HDD installation instruction 6 3 2 6 3 3 Power off the mirror drive and install the second HDD HDD2 the Target Drive Power on the Mirror Drive and the Auto Rebuild function will copy the content of the Source Drive into the Target Drive automatically When the duplication is completed data in these two HDDs are synchronous 6 3 4 Note HDD2 LED is red ...

Reviews: