Setti ng
Functi on
Restore Default Values
Clear all settings from memory, and returns the unit to the fact ory defaults. you are asked to conf irm before
the procedure goes on. Key in Y, then press [Enter] to compfirm. While the settings are being cleared, a
message a appears on the display to indicate so. After the settings have been cleared, another message
appears to indicate that the procedure completed successfully.
OSD Activating Hotkey
Selects which Hotkey combination will activate the OSD function: [Ctrl] [Ctrl] or [Scroll Lock] [Scroll Lock].
The default is the Ctrl key combinaion, but this may conflict with programs running on the computers, in
which case, the scroll Lock opt ion should be selected.
Set Password
Allows you to set a password in order to control access to Locking/Unlocking the Console (see the OSD
Security Features section, below, for det ails).
Setti ng
Default
Display Durat ion
Always On
Display Mode
The Port Number plus the port Name
Scan D
5 Seconds
33
Function Keys
Factory Default Settings:
The factory default settings are as follows:
