Hardware Installation
6
STEP 4
Install the antenna to the receiver
STEP 5
(Disregard this step if skipped in step 3) Take the IR In for RX cable
from the box, insert IR RX cable to the IR In port on the receiver; peel off the
protective paper from the sensor end of the cable and place it with the round
area of the IR sensor facing out towards the viewing area, the IR RX sensor
must be able to receive the signal from the video source device remote control.
STEP 6
Connect one side of the HDMI cable to the receiver and the other
side to your HDMI display device
Receiver
6
7
4
5
