11
Please always check www.iogear.com for the latest
drivers.
If installing on Windows XP, Service Pack 2
(SP2) is required. Verify that this has been
installed before installing the UWB software.
Software Installation
To install the UWB software, insert the included
1.
CD into your computer. The following menu
should appear automatically. If not, select “Run
CD_Start.exe” OR navigate to the CD Rom
drive containing the installation CD and double-
click on CD_Start.exe to bring up the user
menu. Click on Software Installation to begin
the installation process.
IMPORTANT NOTE:
If your PC already has a version of this software
installed, please be sure to un-install it before pro-
ceeding.
Use Control Panel -> Add or Remove Programs.
Scroll to “Ultrasuite with WiCenter Basic.” Click “Ultra-
suite with WiCenter Basic,” then click Remove.
Restart your PC after the software has successfully
un-installed.
You may now proceed with the installaion of new
software.
Summary of Contents for GUWA100U M0425
Page 2: ......