ON/OFF
RESET
Pairing (Optional)
4
STEP 1
Press the Reset button on the
back of the keyboard next to the
ON/OFF
switch while the
keyboard is in
ON
position.
*If you have multiples of the same keyboard in the same area,
please make sure you press the
Reset
button when the
keyboard is the closest to the specific USB RF Receiver that
you want to connect to. The keyboard will connect to the closest
USB RF receiver within range.
FINAL STEP
You will then see the
Battery Low LED
light up, when it
goes off, the pairing in completed. Now the keyboard and
trackball should be working properly. If the keyboard and
trackball are not working, please repeat the steps in
Pairing Section
.
STEP 2
Un-plug and reconnect the USB RF
Receiver into any open USB port of
your computer while the computer is
turned on.
