STEP 1 Remove battery cover on the underside of the keyboard.
STEP 2 Install the 2 AA batteries (included in the kit).
STEP 3 Close the battery cover.
STEP 4 Insert the receiver into a USB port of the computer.
STEP 5 Turn on the switch on the underside of the keyboard.
STEP 6 The LED at the top center of the keyboard will start to blink blue, when it is
out the keyboard and the receiver are now paired and ready to use.
Note: If the LED is blinking red, this is an indication of a low battery condition.
3
Hardware Installation
ON/OFF
RESET
STEP 1, 2, 3
STEP 5
STEP 6
STEP 4
