14
BIOS (RAID Settings)
Creating and deleting RAID sets is a function found in the BIOS. During boot up, the RAID setting
message will appear and pause for a few moments to allow the user access to its settings. The
board will act as a normal NON-RAID card when the BIOS does not have it con
fi
gured for RAID. If
you’re using traditional parallel ATA HDDs, make sure your hard drives are set to master mode before
accessing the RAID settings.
Creating Striped Sets (RAID 0)
1. As the BIOS boots, Press CTRL+S or F4 to enter the RAID bios utility.
2. Select
Create RAID set
. Press
Enter
.
3. Select
RAID 0
then press
Enter
.
4. Select the
Number of hard drives
. Press
Enter
.
Summary of Contents for GICe702S3R5W6
Page 2: ......
