33
Upgrade Succeeded
After the upgrade has completed, a screen appears to inform you that the procedure
was successful:
Click Finish to close the Firmware Upgrade Utility. After a successful completion, the KVM exits
Firmware Upgrade Mode, and resets itself.
Upgrade Failed
If the Upgrade Succeeded screen doesn’t appear, it means that the upgrade failed to complete
successfully, in which case you should do the following:
1. Power off the KVM by removing the power jack.
2. Invoke Firmware Upgrade Mode by holding down the Port 1 button on the front panel and power
on the KVM. The orange LEDs will flash together.
3. Do the firmware upgrade procedure again.