12
Caps Lock LED
Caps Lock LED lights green to indicate Caps Lock is enabled
Scroll Lock LED
Scroll Lock LED lights green to indicate Scroll Lock is enabled
Chassis Intrusion Detection
The IOGEAR Secure KVM Switch will become inoperable and the Front Panel LEDs (except for the Power LED) will
flash constantly when a chassis intrusion, such as the cover being removed, is detected. This is to prevent
malicious tampering with IOGEAR Secure KVM Switch.
The Intrusion Detection is an active always-on function. If all of the front panel LEDs (except for Power LED) flash
continuously or the switch’s enclosure appears to be breached, avoid using this product and contact your
IOGEAR dealer.
Administrator Functions
Administrator functions of IOGEAR Secure KVM Switch enable authorized administrators to configure the Secure
KVM switch, configure user authenticated device filters, and audit log data generated by the Secure KVM Switch.
Log Data Audit
: This function enables authorized administrators to view log data and events generated
by the Secure KVM Switch. The Log Data Audit function is enabled as soon as the Secure KVM Switch is
manufactured. This capability cannot be terminated; it is not affected by KVM power-cycle, KVM Reset,
or Reset KVM to Default.
User Authentication Device Filtering Configuration
: This function enables authorized Administrators to
assign a whitelist and blacklist for User Authenticated Devices.
The Secure KVM Switch Configuration
: This function enables authorized Administrators to perform
functions such as Reset to Factory Default.
Administrators must first log in and be authenticated for the Secure KVM Administrator Functions. To
maximize security, before performing other administrative functions, Administrator
must set a new password
after the first successful login. The Administrator password can be changed anytime via the Administrator
Configuration.
Setup for Administrator Logon
Administrators must first logon and be authenticated for the Secure KVM Administrative Operations.
This section will assist in setting up for Administrator Logon installation.
1. Please make sure that all devices, including source computer, are powered off.
2. Connect a qualified keyboard, mouse, and display to the IOGEAR Secure KVM console section. (Please refer to
the Secure KVM
User Manual
for details)
3. Connect a source computer to Port 1 of the Secure KVM Switch’s KVM Port section using IOGEAR KVM cable
sets. The USB cable attached to the computer's keyboard / mouse must be connected to the KVM USB Port on
the switch. (Please refer to the Secure KVM
User Manual
for details)
4. Turn the IOGEAR Secure KVM Switch power on, and then turn the source computer power on. The IOGEAR
Secure KVM Switch will switch to Port 1 after a successful self-test.
