IO-Power Technology Co., Ltd
1F,No.100, Jinzhu Rd., North Dist., Hsinchu City 30055, Taiwan
http:// w w w. io -p ow e r. c om
e-mail:
Tel:+886 3 5429395 Fax: +886 3 5357297
Form No.
：
IOP-OAPA-001-001
9
/
22
Retention date
：
6Years
Flashlight
The flashlight key is on the right side of the WIFI phone. Press the key, flashlight is turned on;
Release the key, flashlight is turned off.
WLAN and VOIP Setting
This product support IEEE802.11b/g and SIP protocol, the default setting is without SIP
information, you should get the SIP name, password and domain from operator first.
For example, the information of the WLAN you are going to use is:
SSID: WIFIAP
Security type: WEP-open
Password/Text: WIFI (or Hex key: 1016A386E)
The information of the SIP server you are going to use is:
SIP server（domain）: 31.108.26.51
User name (SIP phone number):123456
SIP phone number: 123456
(Phone number could be the same to user name or not, that due to the setting of SIP server.)
Password: 1234
The detailed settings are as follows:
A: Search Available WLAN
1.
At standby mode, press the left soft key or OK key to enter the main menu. (The default
initial password: 000000)
2.
Select Settings> WLAN setup, select one from the default 1-8 AP in WLAN setup, these
eight factory default configurations are empty, the default display is "D list No.".
3. After entering the "Options" menu, first select "WLAN Search". After searching, there will be
a list to show you the available AP, with security type and signal strength. Select the one
with highest strength (if this AP is permitted to use), press left soft key or OK key to setting.
Note: The security type of the selected AP was shown at the searched AP list. We take the type
of WEP-OPEN for example here; you can set other types by following the indication.
