IO-Power Technology Co., Ltd
1F,No.212, Ln. 271, Wuling Rd., North Dist., Hsinchu City 30053, Taiwan
http://www.io-power.com
e-mail:
Tel: 03-5429395 Cell: 0933168849 Fax: 03-5357297
Form No.
Form No.
Form No.
Form No.：
：
：
：IOP
IOP
IOP
IOP----OANI
OANI
OANI
OANI----001
001
001
001----001 Rev.
001 Rev.
001 Rev.
001 Rev.：
：
：
：A.1
A.1
A.1
A.1 保存期限
保存期限
保存期限
保存期限：
：
：
：6666 年
年
年
年
3.
3.
3.
3. AP Configuration with SMT User Interface
AP Configuration with SMT User Interface
AP Configuration with SMT User Interface
AP Configuration with SMT User Interface
3333----1.
1.
1.
1. Configuring AP
Configuring AP
Configuring AP
Configuring AP with
with
with
with Telnet
Telnet
Telnet
Telnet
STEP
STEP
STEP
STEP––––1111.... Power on the AP
Power on the AP
Power on the AP
Power on the AP
1.Connect power supply to PoE injector with the AC power cord provided as shown in the above
diagram. The yellow
POWER
POWER
POWER
POWER
LED on the PoE will be on when the PoE has adequate power supply.
2.Connect The AP to
POWER & DATA OUT
POWER & DATA OUT
POWER & DATA OUT
POWER & DATA OUT
port on the PoE with MIL-C-5015 IP67 Cat-5 Ethernet
Cable provided. The red
ACTIVE
ACTIVE
ACTIVE
ACTIVE
LED indicates if the AP has successfully powered-on.
3.Connect
DATA IN
DATA IN
DATA IN
DATA IN
port on the PoE injector with Ethernet cable to the LAN that the AP associates
with.
STEP
STEP
STEP
STEP––––2222. Verify IP address setting
. Verify IP address setting
. Verify IP address setting
. Verify IP address setting
Configure the network settings on your PC to obtain an IP address. Computer uses IP addresses to
communicate with each other across a network, such as a LAN.
The default IP address of the AP is
The default IP address of the AP is
The default IP address of the AP is
The default IP address of the AP is
192.168.1.1
192.168.1.1
192.168.1.1
192.168.1.1
so the PC needs to be set in the same net scope to access AP with Telnet.
1.Go to
Con
Con
Con
Control Panel
trol Panel
trol Panel
trol Panel
of your PC and
double-click
Network
Network
Network
Network C
CC
Connections
onnections
onnections
onnections
icon.
2.Right click
Local
Local
Local
Local Area
Area
Area
Area Connection
Connection
Connection
Connection
and select
Properties
Properties
Properties
Properties
.
3.Select
TCP/IP
TCP/IP
TCP/IP
TCP/IP
for the applicable Ethernet adapter and click
Properties
Properties
Properties
Properties
.
4.Click the
IP Address
IP Address
IP Address
IP Address
tab page, select
USE the following
USE the following
USE the following
USE the following IP address
IP address
IP address
IP address
, type an address between
192.168.1.
192.168.1.
192.168.1.
192.168.1.2222
to
1
92.168.1.254
92.168.1.254
92.168.1.254
92.168.1.254
(192.168.1.1 is for the AP) for
IP Address
IP Address
IP Address
IP Address
and
255.255.255.0
255.255.255.0
255.255.255.0
255.255.255.0
for
Subnet
Subnet
Subnet
Subnet
Mask
Mask
Mask
Mask
, then click
OK
OK
OK
OK
button.
STEP
STEP
STEP
STEP––––3333. . . . Connect the AP by telnet
Connect the AP by telnet
Connect the AP by telnet
Connect the AP by telnet
After having the correct connection, start the telnet session to
192.168.1.1
192.168.1.1
192.168.1.1
192.168.1.1
.
Enter the default password
Enter the default password
Enter the default password
Enter the default password
(Please Check User Menu)
(Please Check User Menu)
(Please Check User Menu)
(Please Check User Menu)
and press ENTER on your keyboard to enter the main menu. The system
menu tree (SMT) will appear on your terminal software as shown below.
Please refer to the user manual for detailed description of each selection item.