*
If your motherboard does not support an addressable
header, please use the included Addressable RGB
Modular Controller to connect to your PSU’s SATA cable
and the fan’s Addressable RGB Y-Cable in order to use
the 14 different lighting effects.
Hold the button to turn on or off the lights. Tap the button to change the
lighting modes.
*InWin reserves the right to change the lighting modes.
Bottom ARGB Strip
Fan 1
ARGB Y-Cable
PSU's
SATA cable
ARGB One-Click
Controller ver. 1.1
ARGB One-Click Controller
1
Rainbow
8
Light at the end of the
Tunnel
2
LED-Red Breathing
9
Light at the end of the
Tunnel
3
LED-Green
10
Rotating LED Trio
4
LED-Blue
11
Full Circle
5
LED-Purple
12
Flow-Red
6
LED-White
13
Flow-Green
7
Light at the end of the
Tunnel
14
Flow-Blue
Installation