background image

22

LIMITED WARRANTY/DISCLAIMER — 
PT12-BV BAROMETRIC COMPENSATOR/VACUUM SENSOR

A.   Seller warrants that products manufactured by Seller when properly installed, used 
and maintained

 with a properly installed desiccant tube

, shall be free from defects in 

material and workmanship.   Seller’s obligation under this warranty shall be limited to 
replacing or repairing the part or parts or, at Seller’s option, the products which prove 
defective in material or workmanship within ONE (1) year from the date of delivery, 
provided that Buyer gives Seller prompt notice of any defect or failure and satisfactory 
proof thereof.   Any defective part or parts must be returned to Seller’s factory or to an 
authorized service center for inspection.   Buyer will prepay all freight charges to return 
any products to Seller’s factory, or any other repair facility designated by Seller.   Seller 
will deliver replacements for defective products to Buyer (ground freight prepaid) to the 
destination provided in the original order.   Products returned to Seller for which Seller 
provides replacement under this warranty shall become the property of Seller.

This limited warranty does not apply to lack of performance caused by abrasive materials, cor-
rosion due to aggressive fl uids, mishandling or misapplication.   Seller’s obligations under this 
warranty shall not apply to any product which (a) is normally consumed in operation, or (b) has a 
normal life inherently shorter than the warranty period stated herein.

In the event that equipment is altered or repaired by the Buyer without prior written approval by 
the Seller, all warranties are void.   Equipment and accessories not manufactured by the Seller are 
warranted only to the extent of and by the original manufacturer’s warranty.

THE FOREGOING WARRANTIES ARE IN LIEU OF ALL OTHER WARRANTIES, WHETH-
ER ORAL, WRITTEN, EXPRESSED, IMPLIED OR STATUTORY.   IMPLIED WARRANTIES 
OF FITNESS AND MERCHANTABILITY SHALL NOT APPLY.   SELLER’S WARRANTY 
OBLIGATIONS AND BUYER’S REMEDIES THEREUNDER (EXCEPT AS TO TITLE) ARE 
SOLELY AND EXCLUSIVELY AS STATED HEREIN.   IN NO CASE WILL SELLER BE 
LIABLE FOR CONSEQUENTIAL DAMAGES, LABOR PERFORMED IN CONNECTION 
WITH REMOVAL AND REPLACEMENT OF THE SENSOR SYSTEM, LOSS OF PRODUC-
TION OR ANY OTHER LOSS INCURRED BECAUSE OF INTERRUPTION OF SERVICE.   
A NEW WARRANTY PERIOD SHALL NOT BE ESTABLISHED FOR REPAIRED OR 
REPLACED MATERIAL, PRODUCTS OR SUPPLIES.   SUCH ITEMS SHALL REMAIN 
UNDER WARRANTY ONLY FOR THE REMAINDER OF THE WARRANTY PERIOD ON 
THE ORIGINAL MATERIALS, PRODUCTS OR SUPPLIES.

B.   With respect to products purchased by consumers in the United States for personal use, the 
implied warranties including but not limited to the warranties of merchantability and fi tness for a 
particular purpose, are limited to twelve (12) months from the date of delivery.

Some states do not allow limitations on the duration of an implied warranty, so the above limita-
tion may not apply to you.   Similarly, some states do not allow the exclusion or limitation of 
consequential damages, so the above limitation or exclusion may not apply to you.   This limited 
warranty gives you specifi c legal rights; however, you may also have other rights which may vary 
from state to state.

Summary of Contents for AquiStar PT12-BV



























Reviews: