Optional:
Peel the clear film from the adhesive
on the power connector shroud.
13a
13a
Position the power connector shroud
onto the back of the device so that it
hooks around the power connector.
Apply pressure for at least 10
seconds.
13b
13b
Optional:
If there is slack in the power
connector cable, use the cable
manager to contain it by first
removing the clear film from the 2
adhesives.
14a
14a
Pull the power connector cable
gently across the back of the device
to remove the slack and place the
cable manager over the cable to hold
it in place. Apply pressure for at least
10 seconds.
14b
14b
Center the puck on the back of the
device and apply pressure for at least
10 seconds.
12
11
Peel the clear film from the adhesive
on the puck.
10
Plug the power connector on the
puck into the device.
Remove the adhesive from its backing
and place it on the puck. If there is a
yellow plunger present on the puck,
ensure that it fits into the cutout on the
adhesive. Apply pressure for at least
10 seconds.
9