Peel the clear film from the 2
adhesives on the bottom of the
swivel base.
CT101
Stand, Bases & Pucks
2e
Secure the swivel base to the stand
using the provided screw.
2c
Optional Swivel Base
(CT1012) Installation:
Remove the 2 adhesives from the
bottom of the stand.
2a
Route the stand’s power cable
through the swivel base.
2b
Use the provided alcohol wipe to
clean the fixture where the stand
will be placed. Allow it to dry
completely.
1
CO
NTENTS:
One pad saturated in 75%
Isopropyl Alcoho
l
DIRECTIONS:
Apply topically as
needed to cleanse
surface mounting area
.
FOR EXTERNA
L USE ONLY
KEEP OUT OF REACH OF
CHILDREN
KEEP AWAY FROM EY
ES
AND FIRE
Optional:
If routing the power cable across the
fixture surface, run the cable down
the channel in the bottom of the
base.
2f
Optional:
If using the stud mount option with the
swivel base, insert and tighten the stud
into the threaded hole.
Note:
The use of the adhesives (see
the next step) is still recommended to
prevent the rotation of the base.
2d
