INVT IPE300 Series, Opeartion Manual

Page: 323 / 383

IPE300 series engineering VFD Extension card
-312-
Indicator Definition Function
LED2 Online indicator
This indicator is on when the communication card is
online and data exchange can be performed.
It is off when the communication card is not in the online
state.
LED3
Offline/Fault
indicator
This indicator is on when the communication card is
offline and data exchange cannot be performed.
It blinks when the communication card is not in the
offline state.
It blinks at the frequency of 1 Hz when a configuration
error occurs: The length of the user parameter data set
during the initialization of the communication card is
different from that during the network configuration.
It blinks at the frequency of 2 Hz when user parameter
data is incorrect: The length or content of the user
parameter data set during the initialization of the
communication card is different from that during the
network configuration.
It blinks at the frequency of 4 Hz when an error occurs in
the ASIC initialization of PROFIBUS communication.
It is off when the diagnosis function is disabled.
LED4 Power indicator
This indicator is on after the control board feeds power
to the communication card.
For details, see the VFD communication card manual.
A.7.2 Ethernet communication card (EC-TX504)
The EC-TX504 communication card adopts standard RJ45 terminals.
Indicator definition:
Indicator Definition Function
LED1 Status indicator
This indicator is on when the extension card is
establishing a connection with the control board;