INVT IPE300 Series, Opeartion Manual

Page: 109 / 383

IPE300 series engineering VFD Basic operation guidelines
-98-
Function
code
Name Description Default
P10.10 Multi-step speed 4 -100.0
–100.0%
0.0%
P10.11 Running time of step 4 0.0
–6553.5s (min)
0.0s
P10.12 Multi-step speed 5 -100.0
–100.0%
0.0%
P10.13 Running time of step 5 0.0
–6553.5s (min)
0.0s
P10.14 Multi-step speed 6 -100.0
–100.0%
0.0%
P10.15 Running time of step 6 0.0
–6553.5s (min)
0.0s
P10.16 Multi-step speed 7 -100.0
–100.0%
0.0%
P10.17 Running time of step 7 0.0
–6553.5s (min)
0.0s
P10.18 Multi-step speed 8 -100.0
–100.0%
0.0%
P10.19 Running time of step 8 0.0
–6553.5s (min)
0.0s
P10.20 Multi-step speed 9 -100.0
–100.0%
0.0%
P10.21 Running time of step 9 0.0
–6553.5s (min)
0.0s
P10.22 Multi-step speed 10 -100.0
–100.0%
0.0%
P10.23 Running time of step 10 0.0
–6553.5s (min)
0.0s
P10.24 Multi-step speed 11 -100.0
–100.0%
0.0%
P10.25 Running time of step 11 0.0
–6553.5s (min)
0.0s
P10.26 Multi-step speed 12 -100.0
–100.0%
0.0%
P10.27 Running time of step 12 0.0
–6553.5s (min)
0.0s
P10.28 Multi-step speed 13 -100.0
–100.0%
0.0%
P10.29 Running time of step 13 0.0
–6553.5s (min)
0.0s
P10.30 Multi-step speed 14 -100.0
–100.0%
0.0%
P10.31 Running time of step 14 0.0
–6553.5s (min)
0.0s
P10.32 Multi-step speed 15 -100.0
–100.0%
0.0%
P10.33 Running time of step 15 0.0
–6553.5s (min)
0.0s
P10.34
ACC/DEC time of steps 0
–7
of simple PLC
0x0000
–0XFFFF
0000
P10.35
ACC/DEC time of steps 8
–15
of simple PLC
0x0000
–0XFFFF
0000
P17.27
Simple PLC and actual step of
multi-step speed
0-15
0
5.5.15 Local encoder input
The VFD supports pulse count function by inputting the count pulse from HDI high-speed pulse port.
When the actual count value is no less than the set value, digital output terminal will output
count-value-reached pulse signal, and the corresponding count value will be zeroed out.