INVT IPE300 Series, Opeartion Manual

Page: 101 / 383

IPE300 series engineering VFD Basic operation guidelines
-90-
Function
code
Name Description Default
P05.18 S4 switch-on delay 0.000
–50.000s
0.000s
P05.19 S4 switch-off delay 0.000
–50.000s
0.000s
P05.20 HDIA switch-on delay 0.000
–50.000s
0.000s
P05.21 HDIA switch-off delay 0.000
–50.000s
0.000s
P05.22 HDIB switch-on delay 0.000
–50.000s
0.000s
P05.23 HDIB switch-off delay 0.000
–50.000s
0.000s
P07.39
Input terminal status at
present fault
0
P17.12
Digital input terminal
status
0
5.5.12 Digital output
The VFD carries two groups of relay output terminals, one open collector Y output terminal and one
high-speed pulse output (HDO) terminal. The function of all the digital output terminals can be
programmed through function codes, of which the high-speed pulse output terminal HDO can also be
set to high-speed pulse output or digital output by function code.
0
1
2
3
4
5
.
.
.
.
29
30
P06.01
P06.03
P06.04
P06.02
T delay
T delay
T delay
T delay
0
1
P06.05 output polarity
selection
（
Default value: 0
）
（
Default value: 0
）
（
Default value: 1
）
（
Default value: 5
）
P06.00
HDO
input type
0
1
0
1
0
1
delay
0
1
-1
-1
-1
-1
P17.12
Digital input
terminal state
P07.40
Digital output
terminal state
of current fault
Fault ？
Fault
Run
Y BIT0 HDO BIT1
ROI BIT2 RO2 BIT3
P06.05, P17.12, P07.40 display
P06.00
0: Open collector high-
speed pulse output
1: Open collector output
P06.07
P06.09
P06.11
P06.13
Y
RO2
ROI
HDO
Digital switch-off delay
Digital output selection
T delay
T delay
T delay
T delay
delay
P06.06
P06.08
P06.10
P06.12
Digital switch-on delay
The following table lists the function code options. A same output terminal function can be repeatedly
selected.
Setting Function Description
0 Invalid The output terminal does not have any function.
1 Running Output ON signal when there is frequency output during running
2 Running forward
Output ON signal when there is frequency output during forward
running
3 Running reversely
Output ON signal when there is frequency output during reverse
running
4 Jogging Output ON signal when there is frequency output during jogging