pg. 13
2.6 Setting up SweetSpot™ (SST™)
SweetSpot™ allows you to sit anywhere within the room and still receive a correct stereo
image. To set up this technology first ensure your Y Speakers are placed and oriented
correctly as shown in sections
2.1 Y Speaker Positioning
and
2.2 Y Speaker Distance
and Orientation
.
The Front and Rear speakers have separate SST™ Settings to ensure SST™ is operating at
the highest quality. The
SST™ factory default setting is 0.5
, which covers a wide range
of environments. To set up SweetSpot™ for your listening environment follow the steps
below.
1.
Measure the distance from the most off centre seating position to the
closest
Front Y
Speaker, as shown in the diagram on the next page to obtain the
Close Distance
.
2.
Measure the distance from the most off centre seating position to the
furthest
Front
Y Speaker, as shown in the diagram on the next page to obtain the
Far Distance
.
3. Subtract the
Close Distance
from the
Far Distance
to obtain the
Delay Distance
,
refer to the table below and set the SST™™ FRONT dial to the corresponding number.
This delays the outside Electrostatic Panel on the Y Speakers by the time difference
between the close and far speaker.
Far Distance - Close Distance = Delay Distance
Delay Distance
(Metres)
0m
0.4m
0.5m
0.6m
0.8m
0.9m
1.0m
1.2m
1.4m
1.6m
Delay Distance
(Feet, Inches)
0’
1’ 4”
1’ 8”
2’
2’ 8”
3’
3’ 3”
3’ 11”
4’ 7”
5’ 3”
SST™™ REAR/
FRONT`Setting
0
0.4
0.5
0.6
0.8
0.9
1.0
1.2
1.4
1.6
4. Repeat steps 1-3 for the SST™ REAR Setting by measuring distances to the Rear
Speakers. By doing this you will have calibrated SST™ correctly.
