involight TWINBEAM2410 User Manual Download Page 3

2

1. Description of the Device

●8*10W high power white LED
●16/18 channels.
●Average of 50,000 hours of super-long LED life, low energy consumption, energy

conservation and environmental protection LED;

●The static constant current drive mode, high precision of constant current;R, G, B, W

dimming separately, and the class of 256 brightness, flicker-free.

●Light spot angle: 5.2º,
●Can play by Auto or DMX controller;
●Perfect blue LCD display, touch press buttons
●Product widely using, simple installation. Applicable for Disco, Clubs, KTV, Pub,Bar,Family

party etc..

2. Safety Instructions

This device has left the factory in perfect condition. In order to maintain this condition and to
ensure a safe operation, it is absolutely necessary for the user to follow the safety instructions
and warning notes written in this user manual.

►If the device has been exposed to temperature changes due to environmental changes, do not
switch it on immediately. The arising condensation could damage the device. Leave the device
switched off until it has reached room temperature.

►Please make sure that the device be earthed.

►Please replace housing if it is broken. This fixture can be using after finished installed.

►The electric connection must carry out by qualified person.

►Make sure that the available voltage is not higher than stated at the end of this manual.

►Make sure the power cord is never crimped or damaged by sharp edges. If this would be the
case, replacement of the cable must be done by an authorized dealer.

►If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively
replaced by the manufacturer or his service agent or a similar qualified person in order to avoid a
hazard.

CAUTION!

Be careful with your operations. With a dangerous voltage you can suffer a
dangerous electric shock when touching wires!

Warning!

Damages caused by the disregard of this user manual are not subject to warranty. The
dealer will not accept liability for any resulting defects or problems.

Summary of Contents for TWINBEAM2410











Reviews: