When show “Slave Mode”press enter button enter sumenu ,Press UP or DOWN button select “Slave1 Mode”
、
“Slave2 Mode”
、
“Master Mode”
。
Press enter button to confirm .When on “Slave1 Mode”,this light will be work with the master light in the
synchronization.
When on “Slave2 Mode”,this light work with the master light in the synchronization in some time ,sometimes ,will
work the opposite direct of the master light .this is a special master/slave effect .
When “Master Mode”as master light,through DMX signal with other light setup as “Slave1 Mode” or “Slave2
Mode”,they will be running the same effect program ,the same direction or opposite direction.
When on “Show Mode”,press enter button enter next menu,press UP or DOWN button select “Sound”
、
“Color”
、
“Fade”these three built-in program .
When on “Sound”mode ,this light will be accept the sound signal ,follow the music running the different effect .If
there is no music signal ,the light will be auto run ,once there is sound signal ,the light will be work follow the
music rhythm to work .When on “Color”mode ,press enter ,the light will be run in single color jumping .When on
“Fade”,press enter button you can select the speed of fade .There are total 9 kinds of speed for your choose.
When show “Black LCD”,press enter button enter the menu “LCDLight Off”
、
“LCDLight On”,can choose the turn
on /off LCD.
When show “White Balance”,press enter button enter the menu of setting up color ,through UP or DOWN
button ,the user can select the brightness of one section color.The menu : “Red-1 Balance”
、
“Green-1 Balance”
、
“Blue-1 Balance”
、
“Red-2 Balance”
、
“Green-2 Balance”
、
“Blue-2 Balance”
、
“Red-3 Balance”
、
“Green-3 Balance”
、
“Blue-3 Balance”
、
“Red-4 Balance”
、
“Green-4 Balance”
、
“Blue-4 Balance”. On the menu press enter button ,enter
the menu can adjust the brightness of single color 0-255.
When show “Auto Test”,press enter button mthe system as : red
、
green
、
blue
、
white ,there are 4 kinds of single color
jumping .
When on “Fixture Time”,press enter button unser can check how long this light work ,the unit as an hour .
Notice :The user setup the mode which he need ,like “slave mode”
、
“ channel mode”,press menu button more than
2 seconds ,the system will be exit the menu ,and rung the setup work condition .And power supply ,the system will
be work in the setup condition .
Summary of Contents for QUADBAR1631
Page 1: ......
