involight LEDRING800, User Manual

Page: 3 / 6

2. Auto run mode
You can press
“
MODE
”
button to select auto run mode, it shows , then it will run the built-in
programs automatically.
Press
“ SETUP”, it shows n. 001, then you can adjust the running loops number by “ UP ” “ DOWN ”
If continuing pressing “ SETUP”, it will show SPxx, Fdxx, FSxx, then you can set the value for speed, fading
and flash by
“
UP
” “
DOWN
”
3. DMX mode
You can control the devices individually via your DMX-controller. Press
“
MODE
”
button until it shows
, this means DMX address is 001, you can set the DMX address by “ UP ” and “ DOWN ” buttons. If
press “ SETUP ” button, it will show d-p1 , it means the device is in which DMX mode 1. You can switch
these DMX modes by “ UP ” and “ DOWN ” buttons. There are 6 DMX modes.
DMX value as follows:
DMX mode1 ： d-P1
CH1 CH2 CH3
R G B
0—255 dimming 0—255 dimming 0—255 dimming
DMX mode2 ： d-P2
CH1 CH2 CH3 CH4
R G B
Master
dimmer
0—255 dimming 0—255 dimming 0—255 dimming 0—255 dimming
DMX mode3
：
d-P3
CH1 CH2 CH3 CH4 CH5 CH6 CH7
R G B R G B R
0—255 dimming 0—255 dimming 0—255 dimming 0—255 dimming 0—255 dimming 0—255dimming 0—255 dimming
CH8 CH9 CH10 CH11 CH12 CH13 CH14
G B R G B flash Master dimmer
0—255 dimming 0—255 dimming 0—255 dimming 0—255 dimming 0—255 dimming 0—255 0—255 dimming