involight LEDBAR500, User Manual

Page: 3 / 6

3. When the LED display shows ~ , first time to press the “SETUP”, it will shows the “SP.XX”, then
setup the program running speed
～
(SP100). through the “UP” or “DOWN”; second time to press
the “SETUP”, it will shows the “FSxx”, then setup the speed of the strobe
～
through the “UP” or
“DOWN”.
2. Auto Running Mode
Press the “MODE” to enter into the auto running working mode “AUTO”, the fixture will perform the 9 kinds of
working mode from Pr.01~Pr.09, the user can setup the running speed, strobe speed under the program of
Pr.01~Pr.09, the finished effects would be perform in order under the auto running working mode.
3. DMX Mode
1. Press the “MODE”, enter the DMX working mode menu “d.×××”.
2. Press the “UP” or “DOWN” to setup the DMX address value
～
.
3. Press the “SETUP”, enter the DMX working mode menu X-ch.
4. Press the “UP” or “DOWN” to set up the DMX working mode, there are three kinds of working mode as ,
, .
DMX working mode 1
：
CHANNEL VALUE FUNCTION
CH1 0-255 Master dimmer
CH2 0-255 Red
CH3 0-255 Green
CH4 0-255 Blue
CH5 0-255 Strobe
DMX working mode 2:
CHANNEL VALUE FUNCTION
CH1 0-255 Master dimmer
CH2 0-255 Red 1
CH3 0-255 Green 1
CH4 0-255 Blue 1
CH5 0-255 Red 2
CH6 0-255 Green 2
CH7 0-255 Blue 2
CH8 0-255 Strobe
DMX working mode 3:
（
9 channels
）
CH1 CH2 CH3 CH4 CH5 CH6 CH7 CH8 CH9
0-255 0-255 0-255 0-255 0 0 NO 0-255 0-127