2
Addressing
Each device occupies
7
channels. To ensure that the control signals are properly directed to each device, the device requires
addressing. This is to be adjusted for every single device by changing the DIP-switches as set out in the table below.
The starting address is defined as the first channel from which the device will respond to the controller. Please make sure that
you do not have any overlapping channels in order to control each device correctly and independently from any other fixture on
the DMX data link. If two, three or more devices are addressed similarly, they will work similarly.
Occupation of the DIP-switches:
Controlling:
After having addressed all devices, you may now start operating these via your controller.
DMX PROTOCOL
Channel 1 – Red
000 – 255
0 – 100% Dimming
Channel 2 – Green
000 – 255
0 – 100% Dimming
Channel 3 – Blue
000 – 255
0 – 100% Dimming
Channel 4 – White
000 – 255
0 – 100% Dimming
Channel 5 – Strobe
000 – 010
Off
011 - 255
Flash, with increasing speed
Channel 6 – Internal Programs, Auto Mode, Sound
Control
000 – 010
No function
011 – 034
Program 1
035 – 058
Program 2
059 – 082
Program 3
083 – 106
Program 4
107 – 130
Program 5
131 – 154
Program 6
155 – 178
Program 7
179 – 202
Program 8
203 – 226
Program 9
227 – 250
Auto Mode: Internal Programs
251 – 255
Sound Controlled Mode
Channel 7 – Motor
000 – 000
No Rotation
001 – 127
Rotation, clockwise, with increasing speed
128 - 255
Rotation,
counter-clockwise,
with
decreasing speed
CLEANING AND MAINTENANCE
We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use alcohol or solvents!
There are no serviceable parts inside the device except for the fuse. Maintenance and service operations are only to be carried
out by authorized dealers.
Replacing the fuse
If the fine-wire fuse of the device fuses, only replace the fuse by a fuse of same type and rating.
Before replacing the fuse, unplug mains lead.
Procedure:
Step 1:
Take out the fuseholder under the power supply.
Step 2:
Remove the old fuse from the fuseholder.
Step 3:
Install the new fuse in the fuseholder.
Step 4:
Replace the fuseholder in the housing and fix it.
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device becomes damaged, it has to be replaced by authorized dealers only in order to avoid
hazards.
TECHNICAL SPECIFICATIONS
Power supply: 220-250 V AC, 50-60 Hz
Power consumption: 30W
Number of DMX channels: 7
DMX-512 connection: 3-pin XLR
Beam angle: 60°
Sound-control: via built-in microphone via built-in microphone
Maximum ambient temperature
T
a: 45° C
Maximum housing temperature
T
B (steady state): 60° C
Min.distance from flammable surfaces: 0.50 m
Min.distance to lighted object: 0.10 m
Fuse: F 1 A, 250V
Weight: 5.5 kg
Please note: Every information is subject to change without prior notice.
