Never let the power-cord come into contact with other cables! Handle the power cord and all connections
with particular caution!
Make sure that the available voltage is not higher than stated on the rearpanel.
Always plug in the power plug least. Make suer that the power-switch is set to off-position before you con
ections with themains with particular caution!
Make sure that the power-cord is never crimped or damaged by sharp edges.Check the decice and the p-
ower-cord from time to time.
Always disconnect from the mains, when the device is not in use or before cleaning it.
Only handle the power-cord by the plug,Never pull out the plug by tugging the powercord.
This device falls under protection class I.Therefore it is essential to connect the yellow/green conductor
to earth.
The electric connection,repairs and servicing must be carried out by a qualified employee.
Do not connect this device to a dimmer pack.
Do not switch the fixture on and off in short intervals as this would reduce the lamp’s life.
Do not touch the device’s housing bare hands during its operation(housing becomes hot)!
For replacement use lamps and fuses of same type and rating only.
t 90
c
°
C
IP20
t 40
a
°
C
Risk Group 2
According to
En62471
Eye damage!
Avoid looking directly into the light source(meant especially for epileptics)!
Minimum
distance
of
illuminated
objects
0.20 metres from
the lens of the projector.
Maximum
ambient
temperature
Do not operate the fixture if the ambient temperatuer(Ta) exceeds 40
°
C (104
°
F).
Temperature of the external surface
The maximum temperature that can be reached on the external surface of the fitting,in a ther-
mally steadystate
,
is 90
°
C (194
°
F).
IP20
protection
rating
The fitting is protected
against
penetration by solid of over 12mm
(
0.47
”)
in
diameter
(
first
digit 2), but
not
against dripping water,rain,splashes or jets of water (second digit 0).
Indoor use only
Not suitable for household illumination
Photobiological
Safety
CAUTION.Possibly
hazardous
optical
radiation
emitted
from
this
product
.
Do
not
stare at
operating
lamp
.
May
be harmful
to
the eyes
.
Light collimation system
This product contains internal light
collimation
system
.
Avoid
intense
light
from
any
angle.
The products to which this manual refers comply with the European Directives purs-
uant to
:
•
2006/95/EC - Safety
of
electrical
equipment
supplied
at
low
voltage
(
LVD
)
•
2004/108/EC - Electromagnetic Compatibility (EMC)
•
2011/65/EU - Restriction of the use of certain hazardous substances (RoHS)
•
2009/125/EC - EcoDesign requirements for Energy-related Products (ErP)
Protection
against electrical shock
Connection must be made to a power supply system fitted with efficient earthing (Class I app-
liance according to standard EN 60598-1) .It is, moreover, recommended to protect the supply
lines of the projectors from indirect contact and/orshorting to earth by using appropriately
sized
residual current devices
.
The projector needs to be positioned so that the objects hit by the beam of light are at least
- 2 -
0.2
