involight A-000000-05943, User Manual

Page: 25 / 43

24
10-Channel Mode:
Channel Value Function
CH1 0-255
Red from 0
– 100%
CH2 0-255
Green from 0
– 100%
CH3 0-255
Blue from 0
– 100%
CH4 0-255 White from 0
– 100%
CH5 0-255 Amber from 0
– 100%
CH6 0-255 UV from 0
– 100%
CH7 0-255 Dimmer from 0
– 100%
CH8
0-9 No Function
10-255 Strobe (0-100%)
CH9
10-199 Automatic program
200-255 Sound program
CH10 0-255 Speed of the automatic program
3.5 Connections in "DMX" mode:
DMX is the abbreviation for digital multiplex and allows the digital control of several DMX devices via a common
control cable.
Connect the DMX input of the unit to the DMX output of a DMX controller or other DMX device. Connect the output
of the first DMX device to the input of the second and so on to form a series circuit
DMX connectors:
A three-pin XLR socket serves as a DMX output, a three-pin XLR connector serves as a DMX input.
For installations with very long DMX cable paths or high electrical interference, such as in a discotheque, it is
recommended to use a DMX termina
tor. The DMX terminator is connected in an XLR connector as a 120 Ω
resistor between pins 2 and 3, which is plugged into the last output socket of the DMX line.
3.6 Connections in "Master / Slave" mode:
When you configure a group of devices in the "Master / Slave" mode, the first device controls the others and
allows an automatic or music-controlled and synchronized show. This feature is especially useful for starting a
show without great programming. Connect the DMX output of the master device to the DMX input of the first slave
device. Then, connect the DMX output of the first slave device to the DMX input of the second slave device, and
so on.
"Slave" mode: Can be set via IR remote control